TECNOWARE UPS ERA PLUS 2100 IEC TOGETHER ON

Name: TECNOWARE UPS ERA PLUS 2100 IEC TOGETHER ON
Brand: Tecnoware
Price: 170 JOD
Availability: InStock

Not yet rated Write a review

Price: JOD 170.00

Earning In Reward Points: 0

Availability:: In Stock
Product Code:: FGCERAPL2102IEC
Brand:: Tecnoware

Qty

Add to Wish List

Compare this Product

Datasheet & Specifications

UPS ERA PLUS 2100, 2 x 12V 9Ah batteries, It has 1 IEC input and 6 IEC outputs protected against Black-Out, overvoltages and undervoltages. Line Interactive Plus technology. 13x18x32 cm, Weight 14 kg. Equipped with On-Off button with integrated multifunction LED with audible alarm for signaling the operating status and USB interface for controlling UPS continuity and programming on / off via the free UPS management Win / Mac Software. Designed to protect PC Office, DVR for video surveillance, ADSL-Fiber Modem / router, Cash Register. Totally silent.

Dati tecnici

Code	FGCERAPL2102IEC
Max Computer Power*	2.100VA/1.470W
Technology	Line Interactive with stabilizer
Interface	USB Port + RJ11/RJ45 Filter
Cooling	Natural
Audible noise	< 40 dBA to 1 m
Dimension (UPS) WxHxD	13x18,2x32 cm
Dimension (with packing) WxHxD	23,2x27,3x39 cm
Weight	8,6 Kg
Input
Number of phases	1Ph+N
Nominal voltage	Single-phase 230Vac
Input voltage range	+20%/-25%
Nominal frequency	50/60 Hz (automatic selection)
Input frequency range	+/-5%
Output
Number of phases	1Ph+N
Nominal voltage	Single-phase 230Vac
Voltage regulation (Line mode)	AVR (Automatic Voltage Regulation)
Voltage regulation (Battery mode)	+/-5%
Frequency	50/60 Hz (automatic selection)
Inverter waveform	Modified sinewave
Overload capability	< 130%
Transfer time	2 ms (typical)
Battery
Type	Lead acid, sealed, maintenance free
Backup time (typical)	10-90 min
Environmental specification
Working temperature	From 0 to 55 °C (recommended from 20 to 25° C)
Humidity	< 95% without condensation
Maximum altitude	3000 m
IP protection	IP20
Certifications	CE (Standards: Low Voltage Directive IEC EN 62040-1; EMC Directive IEC EN 62040-2; classification IEC EN 62040-3)
	*This UPS is designed and sized for the protection of IT workstations. The power expressed as "Max Computer Power" corresponds to the sum of the Plate Powers, of the Switching Power Supplies present in the IT Stations to be protected. For any use with devices other than IT workstations, it is advisable to seek specific advice from the manufacturer