TECNOWARE On-Line UPS EVO DSP PLUS 1.2KVA PF 0.9 R/T

Name: TECNOWARE On-Line UPS EVO DSP PLUS 1.2KVA PF 0.9 R/T
Brand: Tecnoware
Price: 275 JOD
Availability: InStock

Not yet rated Write a review

Price: JOD 275.00

Earning In Reward Points: 0

Availability:: In Stock
Product Code:: FGCEDP1202RTIEC
Brand:: Tecnoware

Qty

Add to Wish List

Compare this Product

Datasheet & Specifications

UPS EVO DSP PLUS 1,200 RACK TOWER - Power 1,200 VA PF 0,9. On Line Technology (VFI) DSP, 94% Efficiency, Input / output 230 / 230Vac 50 / 60Hz, 8 IEC C13 sockets, dimensions 43.8x8.8x31 cm (2U), weight 12 Kg, bacup time 10 min, including 2 batteries for 12Vdc 9AH. Positioning in 19 "rack or tower, multifunction graphic LCD display, static bypass, hot swap battery, EPO connector, USB and RS232 communication ports, for UPS control and on / off programming via the free TecnoManager software. SNMP card or Dry Contact (optional).

Technical data

Code	FGCEDP1202RTIEC
Nominal Power	1.200 VA
Active power	1.080 W
Power factor	0,9
Technology	On-Line Double Conversion transformerless (VFI-SS-111)
Cooling	Fan cooling
Audible noise	< 45 dBA at 1 m
Positioning	Tower positioning or Into 19’’ rack (2U)
Dimension (UPS) WxHxD	43,8x8,8x31 cm
Dimension (with packing) WxHxD	50x18x40 cm
Wight	12 Kg
Input
Number of phases	1Ph+N
Nominal voltage	208Vac/220Vac/230Vac/240Vac
Input voltage range	110-300Vac
Nominal frequency	50/60 Hz (selectable)
Input frequency range (On-Line mode)	+/- 7%
Input power factor	0,99
Output
Number of phases	1Ph+N
Nominal voltage	208Vac/220Vac/230Vac/240Vac (selectable)
Static voltage Regulation at %100 linear load (On-Line and battery mode)	±1%
Voltage THD at rated linear load	<2% (linear load), <8% (non-linear load)
Crest factor	3:1
Frequency	50/60 Hz (selectable)
Free running frequency	±0,2 Hz
Inverter waveform	Sinewave
Overload capability	110% only audible warning, 110-130% for 30 sec, >130% for 100 ms
Efficiency	94%, calculated in double conversion modeto 100% load according to standard 62040-3
Transfer time	0 ms (On-Line)
Battery
Type	Lead acid, sealed, maintenance free
Backup time (Typical)	10-30 min
Extended autonomy	No
Environmental specification
Working temperature	From 0 to 55 °C (recommended from 20 to 25 °C)
Humidity	< 95% without condensation
Maximum altitude	3000 m
IP protection	IP20
Certifications	CE (Standards: Low Voltage Directive IEC EN 62040-1; EMC Directive IEC EN 62040-2; classification IEC EN 62040-3)